Gas-liquid flow in pipelines ii. design manual

 · This project was initiated on July 1, to obtain a physical understanding of the flow patterns and the phase interactions that exist for gas/liquid flow in long pipelines. Two facilities are being used: One contains horizontal pipelines of 1 inch, 2 inches and 4 inches. The other has vertical pipes with diameters of 3/4 inch, 1 1/2 inches. Natural Gas Pipeline Flow Calculations Harlan H. Bengtson, PhD, P.E. COURSE CONTENT 1. Introduction There are numerous equations that can be used to make natural gas pipeline flow calculations depending upon various factors, such as the magnitude of the pressure drop, the pipe diameter, the length of the pipeline, the Reynolds. C. Design of the Liquid Outlet Nozzle and Vortex-Breaker. The liquid outlet for this GLS is designed with the objective to prevent any entrainment of the incoming gas with the liquid. In-order to ensure that no gas escape with the liquid phase, the following measures were taken; 1) Sizing the liquid outlet nozzle. Ukil et al.

Gas Flow Formulas – An Evaluation in Pipeline and Gas Journal, December and January J. Christopher Finch, Natural Gas Pipeline Company of America David W. Ko, Natural Gas Pipeline Company of America Tutorial – Fluid Flow Formulas published in the PSIG Conference Proceedings. Natural Gas Pipeline Flow Calculations Harlan H. Bengtson, PhD, P.E. COURSE CONTENT 1. Introduction There are numerous equations that can be used to make natural gas pipeline flow calculations depending upon various factors, such as the magnitude of the pressure drop, the pipe diameter, the length of the pipeline, the Reynolds. This project was initiated on July 1, to obtain a physical understanding of the flow patterns and the phase interactions that exist for gas/liquid flow in long pipelines. Two facilities are being used: One contains horizontal pipelines of 1 inch, 2 inches and 4 inches. The other has vertical pipes with diameters of 3/4 inch, 1 1/2 inches.

Here, a unified 3D numerical model of gas-liquid two-phase flow in a horizontal pipe was established using the interface capture method. Sep 7, Of the four type of Two-Phase Flow (Gas-Liquid, Gas-Solid, and flows in inclined pipes and in other geometries are discussed by Hewitt. It can be used for 1) velocity string design, 2) nodal analysis, and 3) gas-lift gas and liquid velocities, and flow regime map along the wellbore.